|
Post by stucrewe on Aug 5, 2020 5:05:47 GMT -5
hi all, i need some advice on which model 325 i need . I have only seen the 325 controller in Manuals, never used or seen one, so I am unsure of the Inputs / outputs. please see the picture of what I need below - any advice appreciated. all the best
|
|
|
Post by Lake Shore Jeff M on Aug 5, 2020 6:43:00 GMT -5
The Model 325 Controller can be equipped with the following input connector combinations:
Model 325 - Two, 6-pin interface connectors for use with Silicon Diode, Platinum and NTCRTD Sensor models (As shown in your picture)
Model 325-T1 - One, 6-pin interface connector for use with Silicon Diode, Platinum and NTCRTD Sensor models and One Thermocouple Input Connector for use with Thermocouple Wire Sensors
Model 325-T2 - Two, Thermocouple Input Connector for use with Thermocouple Wire Sensors
As noted above, the model in your picture is the Model 325 Controller
|
|
|
Post by stucrewe on Aug 5, 2020 7:12:31 GMT -5
The Model 325 Controller can be equipped with the following input connector combinations: Model 325 - Two, 6-pin interface connectors for use with Silicon Diode, Platinum and NTCRTD Sensor models (As shown in your picture) Model 325-T1 - One, 6-pin interface connector for use with Silicon Diode, Platinum and NTCRTD Sensor models and One Thermocouple Input Connector for use with Thermocouple Wire Sensors Model 325-T2 - Two, Thermocouple Input Connector for use with Thermocouple Wire Sensors As noted above, the model in your picture is the Model 325 Controller Many thanks!
|
|