|
|
Post by gigaohm on Jul 26, 2018 11:28:57 GMT -5
Are the RuO2 sensors, especially RX102A bare chip sensors, thermally cycled? Or do I need to do that myself? If so, what is the best method of doing it. Thank you.
|
|
|
|
Post by Lake Shore Ogi on Jul 26, 2018 12:34:14 GMT -5
Hello!
We do not cycle the bare chips. To cycle them on your own, you could cycle them in LN2 and cycle back to room temperature. Our typical procedure would be 1 minute in LN2 and two minutes outside the dewar (room temp) and 60 cycles.
Let us know if you have any other questions!
Greetings,
Ogi K.
|
|
