|
|
Post by painter on Apr 7, 2022 13:26:21 GMT -5
I have the feeling the answer might be the same as for the CU package. But can you confirm that the cernox SD package is electrically insulated from the copper encasement? I did check with a keithly voltmeter to show that the electrical resistance is infinite. But I just wanted to confirm with you that this is indeed the case.
|
|
|
|
Post by Lake Shore Jeff M on Apr 14, 2022 10:50:05 GMT -5
Yes, the SD package is isolated from the sensor, however, if using an electrically conductive adhesive or solder, it is important that the excess does not ‘creep-up’ the edges of the sensor or come in contact with the sensor leads. There is a thin braze joint around the sides of the SD package that is electrically connected to the sensing element. Contact to the sides with any electrically conductive material will cause a short.
|
|
